TATA nano, also said to be known as the world's cheapest car, which has been designed inn-order to fulfill the dream of owning a car for all the middle and lower class families. Well, as I know, TATA nano is the only Indian car to create such a huge hype before its release world wide. Now, TATA nano is all set to roll out from its new plant at Sanand, in the state of Gujarat, India. And hence WD has taken a step forward to provide a detail information about its features and specifications.
The Tata Nano is BS 3 compliant and is also available in the BS 2 variants. The fuel efficiency/mileage of the car is about 23.6km per litre, which is certified by automotive research association of India. The car is said to be rolled out in 3 different variants. They are the Standard, Deluxe, Luxury and Europa variants. Now, lets have a look at all the features and specifications provided as follows,Top speed - 105kmph
Dimensions and Body:
- Length: 3.1m
- Height: 1.6 m
- Width: 1.5 m
- Seat belt: 4
- Trunk capacity: 15 L (0.53 cu ft
- Ground clearance: 180 mm (7.1 in)
- 12-inch wheels
Engine specifications for Tata Nano:
- Rear-wheel drive
- 2-cylinder, 624 cc
- 33 bhp
- Compression ratio: 9.5:1
- Multi point fuel injection petrol engine.
- Engine is rear mounted.
- Power: 33 PS (33 hp/24 kW) @ 5500 rpm
- Torque: 48 N·m (35 ft·lbf) @ 2500 rpm
- 1st time a 2-cylinder gasoline engine was being used in a car with single balancer shaft.
- Anti-vibe balancer shaft
Safety features
- Sheet metal body
- Crumple zones
- Intrusion resistant doors
- Seat belts
- Strong seats and anchorages
- Rear tailgate glass bonded to the body.
- Tubeless Tyres
Performance
- Acceleration: 0-70 km/h (43 mph): 14 seconds
- Maximum speed: 120 km/h (75 mph)
- Turning radius: 4 metres
- Fuel efficiency (overall): 20 kilometres per litre (5 litres per 100 kilometres
- Body and dimensions
0 comments:
Post a Comment